-
Recent Posts
Categories
- art and philosophy (3)
- Case Furniture (2)
- design (3)
- Finishing (11)
- gateway skills (2)
- hardware (1)
- Past lives (5)
- Repairs (26)
- seating (5)
- Tables (18)
- tools (2)
- Uncategorized (11)
- upholstery (1)
- wood movement (4)
- Wood Working (13)
Archives
- March 2014
- February 2014
- November 2013
- August 2013
- July 2013
- April 2013
- January 2013
- November 2012
- October 2012
- September 2012
- August 2012
- July 2012
- June 2012
- May 2012
- April 2012
- March 2012
- February 2012
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
Blogroll
Forums
Web sites
-
Join 98 other subscribers
Meta
Tag Archives: federal period
Federal Work Table V [ finishing ]
This is what the table looked like with a thin coat of shellac on the front but not the top. I did not like how orange the mahogany appeared or the amount of contrast between the three woods I used. The … Continue reading
Posted in Finishing, Tables
Tagged bleach, dye toner, federal period, finishing, hammer veneering, table, veneer, wax
Leave a comment
Crash
I’m writing this on an old computer that I borrowed from my daughter. It has a little bitty screen and not enough memory to deal with the number of pictures I normally post. If you did not guess from the … Continue reading
Federal Work Table IIII [ veneering the top and assembly ]
Cutting and arranging the veneer for the top. I eventually hammered down 5 strips of end grain Butternut to form the center panel of the top. Each strip was hammered down separately but in one session. I next hammered on … Continue reading
Federal Work Table III [ veneering the drawers and apron ]
Background Common wisdom today says that the way you do veneer is to cut out all you pieces, stick them together with veneer tape, spread the glue, stick it in the vacuum press with plain veneer on the back side … Continue reading
Federal Work Table II [ dovetails and building drawers ]
In the first ”Work Table” post I built the carcass, top and legs of the piece. In this post I will show how I built drawers and talk about what I forgot to put in the first post. In the … Continue reading
Posted in Tables, Wood Working
Tagged dovetails, drawers, federal period, table, William and Mary
Leave a comment
Federal Work Table I [ stock prep]
1780 to 1820 is considered the Federal Period in the US. It is heavily influenced by European Neoclassicism and the work of Robert Adam, George Hepplewhite, and Thomas Sheraton. During this period a new form was developed, the ”Work Table”. … Continue reading
Posted in Tables
Tagged dovetails, federal period, hammer veneering, rub joint, stock preparation, veneer
Leave a comment
Federal Style Table [ broken apron ]
The Federal period in the US was from 1780 to 1820, “It Combined the neoclassic furniture style characteristics of Hepplewhite and Sheraton. It is characterized by graceful straight lines, light construction, tapered legs, and the use of inlay, and contrasting … Continue reading
Posted in Repairs
Tagged federal period, fretwork, furniture damage, moisture damage, plywood, repairing a crack, table, wood movement
2 Comments
millcreek woodworking 